【单选题】【消耗次数:1】
A police officer claimed he had attempted to ____ paying his fare.
avoid
reject
refuse
neglect
参考答案:
复制
纠错
相关题目
【单选题】 A police officer claimed he had attempted to _______ paying his fare.
①  avoid
②  reject
③  refuse
④  neglect
【单选题】 It was not until he arrived in class _____ realized he had forgotten his book.
①  when he
②  that he
③  and he
④  he
【单选题】 20. Only when he had handed in his exam paper ____ he had made several mistakes.
①  he has realized
②  does he realize
③  has he realized
④  did he realize
【单选题】 I should think they have done it ________, to avoid paying you the money.
①  with purpose
②  on purpose
③  in purpose
④  to purpose
【单选题】 He didn’t keep on asking me the time any longer as he had had his watch ____.?
①  repaired ?
②  to repair ?
③  repairing ?
④  repair?
【判断题】 He had his leg break when he slipped on a piece of ice.
①  正确
②  错误
【单选题】 3. He had to ______ his past actions when he retired, or he would be punished.
①  consider
②  account for
③  think
④  popular
【单选题】 His mother had talked to him for two hours while he was watching TV, but_____.
①  a little did he hear
②  little did he hear
③  little heard he
④  a little heard he
【单选题】 The reason why he didn’t take the exam was _____ he had an accident on his way to the school.
①  because
②  because of
③  that
④  due to
【单选题】 You had better avoid ___________ in a bus.
①  read
②  reads
③  to read
④  reading
随机题目
【单选题】 双排脚手架横向水平杆(小横杆)靠墙一端至墙装饰面的距离不宜( )。
①  大于100mm
②  大于600mm
③  大于500mm
④  大于400mm
【单选题】 连墙件应靠近主节点设置,这是为了( )。
①  便于施工
②  便于连墙件没置
③  便于立杆接长
④  保证连墙件对脚手架起到约束作用
【单选题】 扣件式钢管脚手架所用的钢管规格尺寸( )。
①  Φ48.3×3.6或Φ51x3
②  Φ38x2.5
③  Φ30x1.5
④  Φ62x4
【单选题】 在脚手架主节点处必须设置一根横向水平杆(小横杆),用直角扣件扣紧,且严禁拆除,这是因为( )。
①  横向水平杆是构成脚手架整体刚度的必不可少的杆件
②  横向水平杆是承传竖向荷载的重要受力构件
③  横向水平杆是承传竖向、水平荷载的重要受力构件
④  横向水平杆是承受竖向荷载的重要受力构件,又是保证脚手架的整体刚度的不可缺少的杆件
【单选题】 脚手架作业层的脚手板铺设规定为( )。
①  可以不满铺
②  应满铺、铺稳
③  应铺满、铺稳,离开墙面不超过120-150mm
④  应铺满、铺稳,离开墙面200-300mm处可以不设任何防护
【单选题】 脚手板搭接铺设时,接头必须支在横向水平杆上,搭接长度和伸出横向水平杆的长度应分别为( )。
①  大于200mm和不小于100mm
②  大于80mm和不小于50mm
③  大于40mm和不小于200mm
④  大于100mm和不小于50mm
【单选题】 单排脚手架的横向水平杆设置应满足要求( )。
①  一端用直角扣件固定在纵向水平杆上,另一端插入墙内,插入深度不小于180mm
②  一端用旋转扣件固定在纵向水平杆上,另一端插入墙内,插入深度不小于100mm
③  一端用旋转扣件固定在纵向水平杆上,另一端插入墙内,插入深度不小于80mm
④  一端用直角扣件固定在纵向水平杆上,另一端插入墙内,插入深度不小于50mm
【单选题】 钢管扣件脚手架立杆底座下的垫板长度和厚度尺寸是( )。
①  不宜小于3跨和小于50mm
②  不宜小于2跨和小于50mm
③  不宜小于2跨和小于30mm
④  不宜小于3跨和小于30mm
【单选题】 钢管扣件脚手架底层步距不应( )。
①  大于2m
②  大于3m
③  大于3.5m
④  大于4.5m
【单选题】 脚手架施工荷载按均布荷载计算可分为( )。
①  承重架3kN/m2,装修架2kN/m2
②  承重架(结构施工用)2.7kN/m2,装修架2.5kN/m2
③  承重架(结构施工用)2kN/m2,装修架1kN/m2
④  承重架(结构施工用)5kN/m2,装修架4kN/m2